Shandong Hyupshin Flanges Co., Ltd produce ANSI B16.5 flanges, B16.47 flanges, AWWA C207 flanges, BS 4504 flanges, BS T/D flanges, DIN flanges, EN 1092-1 flanges, JIS flanges, GOST 12820-80 flanges, GOST 12821-80 flanges, SABS 1123 flanges, SANS 1123 flanges, UNI flanges, KS B1503 flanges, ISO 7005 flanges, NS flanges, AS flanges, Korean KS mark flanges, Korean KS certificate flanges, carbon steel, stainless steel, mild steel, forging flanges, forged flanges, galvanizing flangesShandong Hyupshin Flanges Co., Ltd, Slip On flanges, Slip On FF flange, Slip On RF flanges, SOFF flanges, SORF flanges, Welding Neck flanges, Weld Neck flanges, Welded Neck flanges, WNRF flanges, Blind flanges, Blank flanges, Plate flanges, Flat flanges, FF flanges, Slip on Bossed flanges, Plain flanges, Plane flanges, Raised Face flanges, Flat Face flanges, Threaded flanges, Screwed flanges, Loose flanges, Lapped flanges, Lap Joint flanges, LJ flanges, Socket Weld flanges, SW flanges, BS PT flanges, BS PT threaded screwed flanges, 150lbs flanges, 300lbs flanges, 600lbs flanges, PN6 flanges, PN10 flanges, PN16 flanges, PN25 flanges, PN40 flanges, 5K flanges, 10K flanges, 16K flanges, 20K flanges, 30K flanges, 40K flanges, SOP FF flanges, SOP RF flanges, SO HUB flanges, SOH flanges, SOH RF flanges, SOH FF flanges, SS400 flanges, SF440A flanges, SF390A flanges, C22.8 flanges, A105 flanges, S235JRG2 flanges, RST37-2 flanges, SA A105N flanges, RST37.2 flanges, P235GH flanges, P245GH flanges, P250GH flanges, P265GH flanges, Q235B flanges, A36 flanges, A350 LF flanges, 20# steel flanges, 16Mn flanges, 20Mn flanges  
Bookmark | Contacts | Privacy Policy
Enquiry: sale@hyupshin.cn
 
Shandong Hyupshin Flanges Co., Ltd supply ANSI B16.5 FLANGES, ASME B16.5 FLANGES, ASA B16.5 FLANGES, DIN Flanges (DIN2573, DIN2576, DIN2527, DIN2641, DIN2642, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2501, DIN2502, DIN2503, DIN86030, DIN86044) , Italian UNI Flanges (UNI2276, UNI2277, UNI2278, UNI6083, UNI6084, UNI2280, UNI2281, UNI2282, UNI2283, UNI2284, UNI2253, UNI2254, UNI6091, UNI6092, UNI6093, UNI6094, UNI6095, UNI6088, UNI6089, UNI6090), European Norms EN 1092-1 Flanges (TYPE 01/A, TYPE 01/B1, TYPE 02, TYPE 05, TYPE 11, TYPE 12, TYPE 13), JIS B2220 Flanges, Korean KS B1503 Flanges, BS 4504 Flanges, BS 10 Flanges, BS T/D Flanges, BS T/E Flanges, South African SABS 1123 Flanges, SANS 1123 Flanges, Russian GOST 12820-80 Flanges, GOST 12821-80 Flanges, U.S. AWWA C207 Class D Ring Flanges, Class D Hub Flanges, Class E Ring Flanges, Class E Hub Flanges, Class F Ring Flanges, Class F Hub Flanges, ISO7005-1 Flanges, ISO9624 Flanges, French NFE 29203 Flanges, Australian AS/NZS 4331.1 Flanges, AS4087 Flanges, AS2129 T/D, T/E Flanges, Norwegian NS 2545 Blind Flanges, NS 2546 Blind Flanges, NS 2547 Blind Flanges, NS 2525 Plain Flanges, NS 2526 Plain Flanges, NS 2527 Plain Flanges, NS 2529 Plain flanges, NS2537 Flange, NS2538 Flange, NS2539 Flange, NS2540 Flange, NS2542 Flange, VSM 18695 Flange, VSM 18696 Flange, VSM 18697 Flange, VSM 18716 Flange, VSM 18718 Flange, VSM 18703 Flange
HOME > PRODUCTS CENTER > ANSI B16.5 THREADED SCREWED FLANGE 150LBS 300LBS 600LBS
ANSI, ASME, ASA, B16.5 THREADED FLANGE
Print The Page
CLASS 150 300 600 SCREWED FLANGE  
Raised Face (RF), Flat Face (FF)  
Shandong Hyupshin Flanges Co., Ltd, Manufacturer, ANSI B16.5 Threaded flanges, 150lbs, 300lbs, 600lbs
Shandong Hyupshin Flanges Co., Ltd, Manufacturer, ANSI B16.5 Threaded flanges, 150lbs, 300lbs, 600lbs
Flange Dimensions & Approximate Masses / Flange Weight
Table ANSI, ASME, ASA, B16.5 150lb/sq.in. Threaded Flange NPT
Pipe
Flange Data
Hub Data
Raised Face
Drilling Data
Weight
　 Nominal Size
 　
A
C
D
E
F
G
H
I
J
 　
Outside Dia
Overall Dia
Flange Thickness min 
Overall Length 
Threaded Length min
Hub Dia
Face Dia
Number of Holes
Bolt Hole Dia
Dia of Circle of Holes
Kg/ Piece
　In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
½
0.84
3.50
0.440
0.620
0.620
1.190
1.38
4
0.62
2.38
0.39
　
21.3
88.90
11.20
15.70
15.70
30.20
35.10
 　
15.7
60.45
 　
¾
1.05
3.88
0.500
0.620
0.620
1.500
1.69
4
0.62
2.75
0.56
　
26.7
98.60
12.70
15.70
15.70
38.10
42.9
 　
15.7
69.85
 　
1
1.315
4.25
0.560
0.690
0.690
1.940
2
4
0.62
3.12
0.78
　
33.4
108.00
14.20
17.50
17.50
49.30
50.8
 　
15.7
79.25
 　
1 ¼
1.66
4.62
0.620
0.810
0.810
2.310
2.5
4
0.62
3.50
1.03
　
42.2
117.30
15.70
20.60
20.60
58.70
63.5
 　
15.7
88.90
 　
1 ½
1.9
5.00
0.690
0.880
0.880
2.560
2.88
4
0.62
3.88
1.32
　
48.3
127.00
17.50
22.40
22.40
65.00
73.15
 　
15.7
98.60
 　
2
2.375
6.00
0.750
1.000
1.000
3.060
3.62
4
0.75
4.75
2.06
　
60.3
152.40
19.10
25.40
25.40
77.70
91.9
 　
19.10
120.70
 　
2 ½
2.875
7.00
0.880
1.120
1.120
3.560
4.12
4
0.75
5.50
3.28
　
73
177.80
22.40
28.40
28.40
90.40
104.6
 　
19.10
139.70
 　
3
3.5
7.50
0.940
1.190
1.190
4.250
5
4
0.75
6.00
3.85
　
88.9
190.50
23.90
30.20
30.20
108.00
127
 　
19.10
152.40
 　
3 ½
4
8.50
0.940
1.250
1.250
4.810
5.5
8
0.75
7.00
4.81
　
101.6
215.90
23.90
31.75
31.75
122.20
139.7
 　
19.10
177.80
 　
4
4.5
9.00
0.940
1.310
1.310
5.310
6.19
8
0.75
7.50
5.30
　
114.3
228.60
23.90
33.30
33.30
134.90
157.2
 　
19.10
190.50
 　
5
5.563
10.00
0.940
1.440
1.440
6.440
7.31
8
0.88
8.50
6.07
　
141.3
254.00
23.90
36.60
36.60
163.60
185.7
 　
22.40
215.90
 　
6
6.625
11.00
1.000
1.560
1.560
7.560
8.5
8
0.88
9.50
7.45
　
168.3
279.40
25.40
39.60
39.60
192.00
215.9
 　
22.40
241.30
 　
8
8.625
13.50
1.120
1.750
1.750
9.690
10.62
8
0.88
11.75
12.10
　
219.1
342.90
28.40
44.50
44.50
246.10
269.7
 　
22.40
298.50
 　
10
10.75
16.00
1.190
1.940
1.940
12.00
12.75
12
1.00
14.25
16.50
　
273
406.40
30.20
49.30
49.30
304.80
323.8
 　
25.40
362.00
 　
12
12.75
19.00
1.250
2.190
2.190
14.380
15
12
1.00
17.00
26.20
　
323.8
482.60
31.75
55.60
55.60
365.30
381
 　
25.40
431.80
 　
14
14
21.00
1.380
2.250
2.250
15.750
16.25
12
1.12
18.75
34.60
　
355.6
533.40
35.10
57.15
57.15
400.10
412.7
 　
28.40
476.30
 　
16
16
23.50
1.440
2.500
2.500
18.00
18.5
16
1.12
21.25
44.80
　
406.4
596.90
36.60
63.50
63.50
457.20
469.9
 　
28.40
539.80
 　
18
18
25.00
1.560
2.690
2.690
19.880
21
16
1.25
22.75
48.90
　
457.2
635.00
39.60
68.30
68.30
505.00
533.4
 　
31.75
577.90
 　
20
20
27.50
1.690
2.880
2.880
22.00
23
20
1.25
25.00
61.90
　
508
698.50
42.90
73.15
73.15
558.80
584.2
 　
31.75
635.00
 　
24
24
32.00
1.880
3.250
3.250
26.120
27.25
20
1.38
29.50
86.90
　
609.6
812.80
47.80
82.60
82.60
663.40
692.1
 　
35.10
749.30
 　
NOTE:
1. The thread conforms to ASME B1.20.1 NTP threads as described in Section 10. (The only exceptions are small male and female plain face threaded flanges which use NPSL recount threads.)
2. Class 150 threaded flanges are made without a counterbore. Threads are chamfered to the major diameter (approx.) at an angle of 45° (approx.) at the back of the flange.
3. Weights are based on manufacturer's data and are approximate.
4. For tolerances +-0.5mm.

Table ANSI, ASME, ASA, B16.5 300lb/sq.in. Threaded Flange NPT
Pipe
Flange Data
Hub Data
Raised Face
Drilling Data
Weight
　 Nominal Size
　
A
B
C
D
E
F
G
H
I
J
 　
Outside Dia
Overall Dia
Counter Bore
Flange Thickness min 
Overall Length 
Threaded Length min
Hub Dia
Face Dia
Number of Holes
Bolt Hole Dia
Dia of Circle of Holes
Kg/ Piece
　In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
½
0.84
3.75
0.93
0.56
0.88
0.62
1.5
1.38
4
0.62
2.62
0.64
　
21.3
95.3
23.6
14.2
22.3
15.7
38.1
35
 　
15.7
66.55
 　
¾
1.05
4.62
1.14
0.62
1
0.62
1.88
1.69
4
0.75
3.25
1.12
　
26.7
117.3
29
15.7
25.4
15.7
42.7
42.9
 　
19
82.5
 　
1
1.315
4.88
1.41
0.69
1.06
0.69
2.12
2
4
0.75
3.5
1.36
　
33.4
124
35.8
17.5
26.9
17.5
53.8
50.8
 　
19
88.9
 　
1 ¼
1.66
5.25
1.75
0.75
1.06
0.81
2.5
2.5
4
0.75
3.88
1.68
　
42.2
133.4
44.4
19
26.9
20.6
63.5
63.5
 　
19
98.5
 　
1 ½
1.9
6.12
1.99
0.81
1.19
0.88
2.75
2.88
4
0.88
4.5
2.49
　
48.3
155.4
50.5
20.6
30.2
22.3
69.85
73.15
 　
22.3
114.3
 　
2
2.375
6.5
2.5
0.88
1.31
1.12
3.31
3.62
8
0.75
5
2.87
　
60.3
165.1
63.5
22.3
33.2
28.4
84
91.9
 　
19
127
 　
2 ½
2.875
7.5
3
1
1.5
1.25
3.94
4.12
8
0.88
5.88
4.32
　
73
190.5
76.2
25.4
38.1
31.7
100
104.6
 　
22.3
149.3
 　
3
3.5
8.25
3.63
1.12
1.69
1.25
4.62
5
8
0.88
6.62
5.85
　
88.9
209.6
92.2
28.4
42.9
31.7
117.3
127
 　
22.3
168.1
 　
3 ½
4
9
4.13
1.19
1.75
1.44
5.25
5.5
8
0.88
7.25
7.34
　
101.6
228.6
104.9
30.2
44.4
36.5
133.3
139.7
 　
22.3
184.1
 　
4
4.5
10
4.63
1.25
1.88
1.44
5.75
6.19
8
0.88
7.88
9.61
　
114.3
254
117.6
31.7
47.7
36.5
146
157.2
 　
22.3
200.1
 　
5
5.563
11
5.69
1.38
2
1.69
7
7.31
8
0.88
9.25
12.3
　
141.3
279.4
144.5
35
50.8
42.9
177.8
185.7
 　
22.3
234.9
 　
6
6.625
12.5
6.75
1.44
2.06
1.81
8.12
8.5
12
0.88
10.62
15.6
　
168.3
317.5
171.4
36.5
52.3
45.9
206.2
215.9
 　
22.3
269.7
 　
8
8.625
15
8.75
1.62
2.44
2
10.25
10.62
12
1
13
24.2
　
219.1
381
222.3
41.1
61.9
50.8
260.3
269.7
 　
25.4
330.2
 　
10
10.75
17.5
10.88
1.88
2.62
2.19
12.62
12.75
16
1.12
15.25
34.1
　
273
444.5
276.3
47.7
66.55
55.6
320.5
323.8
 　
28.4
387.3
 　
12
12.75
20.5
12.94
2
2.88
2.38
14.75
15
16
1.25
17.75
49.8
　
323.8
520.7
328.7
50.8
73.15
60.45
374.6
381
 　
31.7
450.8
 　
14
14
23
14.19
2.12
3
2.5
16.75
16.25
20
1.25
20.25
69.9
　
355.6
584.2
360.4
53.8
76.2
63.5
425.4
412.7
 　
31.7
514.3
 　
16
16
25.5
16.19
2.25
3.25
2.69
19
18.5
20
1.38
22.5
88.1
　
406.4
647.7
411.2
57.15
82.5
68.3
482.6
469.9
 　
35
571.5
 　
18
18
28
18.19
2.38
3.5
2.75
21
21
24
1.38
24.75
109
　
457.2
711.2
462
60.45
88.9
69.85
533.4
533.4
 　
35
628.6
 　
20
20
30.5
20.19
2.5
3.75
2.88
23.12
23
24
1.38
27
134
　
508
774.7
512.8
63.5
95.2
73.15
587.2
584.2
 　
35
685.8
 　
24
24
36
24.19
2.75
4.19
3.25
27.62
27.25
24
1.62
32
201
　
609.6
914.4
614.4
69.85
106.4
82.5
701.5
692.1
 　
41.1
812.8
 　
NOTE:
1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

Table ANSI, ASME, ASA, B16.5 600lb/sq.in. Threaded Flange NPT
Pipe
Flange Data
Hub Data
Raised Face
Drilling Data
Weight
　
Nominal Size
　
A
B
C
D
E
F
G
H
I
J
 　
Outside Dia 
Overall Dia
Counter Bore
Flange Thickness min
Overall Length
Threaded Length min
Hub Dia
Face Dia
Number of Holes
Bolt Hole Dia 
Dia of Circle of Holes
Kg/ Piece
　In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
In Mm
½
0.84
3.75
0.93
0.56
0.88
0.62
1.5
1.38
4
0.62
2.62
0.74
　
21.3
95.3
23.6
14.2
22.4
15.7
38.1
35
 　
15.7
66.55
 　
¾
1.05
4.62
1.14
0.62
1
0.62
1.88
1.69
4
0.75
3.25
1.27
　
26.7
117.3
29
15.7
25.4
15.7
47.8
42.9
 　
19.1
82.6
 　
1
1.315
4.88
1.41
0.69
1.12
0.69
2.12
2
4
0.75
3.5
1.52
　
33.4
124
35.8
17.5
28.4
17.5
53.8
50.8
 　
19.1
88.9
 　
1 ¼
1.66
5.25
1.75
0.81
1.12
0.81
2.5
2.5
4
0.75
3.88
2.03
　
42.2
133.4
44.4
20.6
28.4
20.6
63.5
63.5
 　
19.1
98.6
 　
1 ½
1.9
6.12
1.99
0.88
1.25
0.88
2.75
2.88
4
0.88
4.5
2.96
　
48.3
155.4
50.5
22.4
31.75
22.4
69.85
73.15
 　
22.4
114.3
 　
2
2.375
6.5
2.5
1
1.44
1.12
3.31
3.62
8
0.75
5
3.62
　
60.3
165.1
63.5
25.4
36.6
28.4
84.1
91.9
 　
19.1
127
 　
2 ½
2.875
7.5
3
1.12
1.62
1.25
3.94
4.12
8
0.88
5.88
5.28
　
73
190.5
76.2
28.4
41.1
31.75
100.1
104.6
 　
22.4
149.4
 　
3
3.5
8.25
3.63
1.25
1.81
1.38
4.62
5
8
0.88
6.62
7
　
88.9
209.6
92.2
31.75
46
35.1
117.3
127
 　
22.4
168.1
 　
3 ½
4
9
4.13
1.38
1.94
1.56
5.25
5.5
8
1
7.25
8.84
　
101.6
228.6
104.9
35.1
49.3
39.6
133.4
139.7
 　
25.4
184.2
 　
4
4.5
10.75
4.63
1.5
2.12
1.62
6
6.19
8
1
8.5
14.5
　
114.3
273.1
117.6
38.1
53.8
41.1
152.4
157.2
 　
25.4
215.9
 　
5
5.563
13
5.69
1.75
2.38
1.88
7.44
7.31
8
1.12
10.5
24.4
　
141.3
330.2
144.5
44.5
60.45
47.8
189
185.7
 　
28.4
266.7
 　
6
6.625
14
6.75
1.88
2.62
2
8.75
8.5
12
1.12
11.5
28.7
　
168.3
355.6
171.4
47.8
66.55
50.8
222.3
215.9
 　
28.4
292.1
 　
8
8.625
16.5
8.75
2.19
3
2.25
10.75
10.62
12
1.25
13.75
43.4
　
219.1
419.1
222.3
55.6
76.2
57.15
273.1
269.7
 　
31.75
349.3
 　
10
10.75
20
10.88
2.5
3.38
2.56
13.5
12.75
16
1.38
17
70.3
　
273
508
276.3
63.5
85.9
65
342.9
323.8
 　
35.1
431.8
 　
12
12.75
22
12.94
2.62
3.62
2.75
15.75
15
20
1.38
19.25
84.2
　
323.8
558.8
328.7
66.55
91.9
69.85
400.1
381
 　
35.1
489
 　
14
14
23.75
14.19
2.75
3.69
2.88
17
16.25
20
1.5
20.75
98.7
　
355.6
603.3
360.4
69.85
93.7
73.15
431.8
412.7
 　
38.1
527.1
 　
16
16
27
16.19
3
4.19
3.06
19.5
18.5
20
1.62
23.75
142
　
406.4
685.8
411.2
76.2
106.4
77.7
495.3
469.9
 　
41.1
603.3
 　
18
18
29.25
18.19
3.25
4.62
3.12
21.5
21
20
1.75
25.75
173
　
457.2
743
462
82.6
117.3
79.25
546.1
533.4
 　
44.5
654.1
 　
20
20
32
20.19
3.5
5
3.25
24
23
24
1.75
28.5
220
　
508
812.8
512.8
88.9
127
82.6
609.6
584.2
 　
44.5
723.9
 　
24
24
37
24.19
4
5.5
3.62
28.25
27.25
24
2
33
312
　
609.6
939.8
614.4
101.6
139.7
91.9
717.6
692.1
 　
50.8
838.2
 　
NOTE:
1. Class 600 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
Production Capacity & Purchase Details
1. Supply Flange Dimension DN15 - DN600 (1/2" - 24") for threaded flange, Forged Flange.
2. Flange Material Carbon Steel: ASTM A105, A181, A350 LF1, A350LF2, A350LF3, A36, A234 WPB, Q235B, 20#, 20Mn.
3. Flange Material Stainless Steel: ASTM A182 F304, F304L, F316, F316L, F321 etc.
4. Flange Anti Rust: Anti Rust Oil, Black Paint, Yellow Paint Coating, Hot Dipped Galvanized, Cold Galvanized etc.
5. Flange Monthly Output: 3000 tons per Month.
6. Flange Delivery Terms: CIF, CFR, FOB, EXW, transport by sea, by air, by express DHL, FedEx, TNT, EMS etc.
7. Flange Payment Terms: Wire Transfer (T/T), Irrevocable L/C at Sight etc.
8. Flange Minimum Order Quantity (MOQ): 1Ton or 100Pcs per size.
9. Quality Guarantee: EN10204 3.1 Certificate, Mill Certificate, Third Party Inspection, Free Replacement Service.
10. Find More Requirements In Flanges Market.

ANSI B16.5 FLANGE
Shandong Hyupshin Flanges Co., Ltd, ANSI B16.5 flanges, B16.47 Flanges, AWWA C207 Flanges, Manufacturer
 

Search
ANSI ASME ASA B16.5 Threaded Screwed Flange NPT
Class 150 300 600 LBS, Size 1/2"-24"
SHANDONG HYUPSHIN FLANGES CO., LTD

ANSI B16.5 FLANGE
PLATE FLANGE
  ANSI 150 lb/sq.in. Plate
  ANSI 300 lb/sq.in. Plate
  ANSI 600 lb/sq.in. Plate
WELDING NECK FLANGE
  ANSI 150 lb/sq.in. Welding Neck
  ANSI 300 lb/sq.in. Welding Neck
  ANSI 600 lb/sq.in. Welding Neck
  ANSI 900 lb/sq.in. Welding Neck
  ANSI 1500 lb/sq.in. Welding Neck
  ANSI 2500 lb/sq.in. Welding Neck
SLIP ON FLANGE
  ANSI 150 lb/sq.in. Slip on RF / FF
  ANSI 300 lb/sq.in. Slip on RF / FF
  ANSI 600 lb/sq.in. Slip on RF / FF
BLANK FLANGE
  ANSI 150 lb/sq.in. Blank
  ANSI 300 lb/sq.in. Blank
  ANSI 600 lb/sq.in. Blank
  ANSI 900 lb/sq.in. Blank
  ANSI 1500 lb/sq.in. Blank
  ANSI 2500 lb/sq.in. Blank
THREADED FLANGE (NPT) hyupshin flanges
  ANSI 150 lb/sq.in. Threaded / Screwed
  ANSI 300 lb/sq.in. Threaded / Screwed
  ANSI 600 lb/sq.in. Threaded / Screwed
SOCKET WELD FLANGE
  ANSI 150 lb/sq.in. Socket Weld
  ANSI 300 lb/sq.in. Socket Weld
  ANSI 600 lb/sq.in. Socket Weld
  ANSI 900 lb/sq.in. Socket Weld
  ANSI 1500 lb/sq.in. Socket Weld
  ANSI 2500 lb/sq.in. Socket Weld
LAP JOINT FLANGE
  ANSI 150 lb/sq.in. Lap Joint
  ANSI 300 lb/sq.in. Lap Joint
  ANSI 600 lb/sq.in. Lap Joint
BACKING RING FLANGE
  ANSI 150 lbs Backing Ring for HDPE
 
ASTM STEEL MATERIAL
   
Shandong Hyupshin Flanges Co., Ltd, Carbon Steel Flanges, Forged Flanges, Pipe Flanges, Ship Flanges, Project Flanges, Water Works Flanges, Oil Flanges, Power Flanges, Petroleum Flanges, Industrial Flanges, Gas Flanges, Anti Rust Flanges, Manufacturer, Exporter
 

Hot Products
ANSI, ASME, ASA B 16.5 FLANGES
JIS B 2220 FLANGES
KS B 1503 FLANGES
DIN FLANGES
UNI FLANGES
EN 1092-1/01 PN6-PN40 FLANGES
BS 4504 FLANGES
BS 10 T/D, T/E, T/F FLANGES
GOST 12820-80 FLANGES
GOST 12821-80 FLANGES
SABS / SANS 1123 FLANGES
AS 2129 FLANGES, AS 4087 FLANGES
ISO 9624 FLANGES, ISO7005-1 FLANGES
NFE 29203 FLANGES, NS FLANGES
KS B 1522/1541/1543 ELBOWS
BS4504 PN16 SLIP ON FLANGE RF
ANSI B16.5 150# SLIP ON FLANGE RF
ANSI B16.5 CLASS 150 WNRF FLANGE
DIN2632, 2633, 2634 2635 WNRF
EN1092-1/11 PN6-PN40 FLANGE
SABS / SANS 1123 1000/3 FLANGES
   
Shandong Hyupshin Flanges Co., Ltd, Carbon Steel Flanges, Forged Flanges, Pipe Flanges, Ship Flanges, Project Flanges, Water Works Flanges, Oil Flanges, Power Flanges, Petroleum Flanges, Industrial Flanges, Gas Flanges, Anti Rust Flanges, Manufacturer, Exporter
 

Hot Flange's Exporting Leads
   
Shandong Hyupshin Flanges Co., Ltd, Carbon Steel Flanges, Forged Flanges, Pipe Flanges, Ship Flanges, Project Flanges, Water Works Flanges, Oil Flanges, Power Flanges, Petroleum Flanges, Industrial Flanges, Gas Flanges, Anti Rust Flanges, Manufacturer, Exporter
 

Calculator
RSLT

E-mail
Support
Flanges Standards
 Flange's Standards
Hyupshin Flanges
Learn More »
Flanges Standards
 Flange's Materials
Hyupshin Flanges
Learn More »
Flanges Standards
 Certification
Hyupshin Flanges
Learn More »
Flanges Standards
 Service
Hyupshin Flanges
Learn More »
Flanges Standards
 Manufacture & Inspection
Hyupshin Flanges
Learn More »
 
Contact Us
  
Links		  
Why Hyupshin Flanges?		  

Shandong Hyupshin Flanges Co., Ltd

Pingpu Road, Niupai, Mingshui,
Zhangqiu City, Shandong,
China, 250200

Tel: +86 531 83297728-8001
Fax: +86 531 83297728-8007

Email:sale@hyupshin.cn
http://www.hsflanges.com		 ● Home Page
● About Us
● Products Center
● Certificates
● Technology
● Services
● Flanges Gallery
● Company's Blog
● Contact Us
● Flanges Market
● 한국의
● Русский
● 中文版		 ● Competitive Prices
● A Variety of Certification
● Good Quality
● Short Delivery Time
● Fast Shipping Docs Sending
● Heat Number Tracking
● Problem Flange Free Replaced
● All Norms of Flange Providing
Follow Us
Facebook  Twitter  LinkedIn  Google Plus  Skype 
 
  Copyright © 2010- Shandong Hyupshin Flanges Co., Ltd All Rights Reserved.
Online Service
Skype Chat Now on Skype! Company QQ Chat Now on QQ! WhatsApp +8613969085317 WeChat Add Wechat ID
Telephone
0086-531-83297728-8001
+86-156 6830 0963

Fax
0086-531-83297728-8007

E-Mail
sale@hyupshin.cn